And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.228
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.093
And
I accept adding "cowsay" to Additional Software
4.233
And
Additional Software is correctly configured for package "cowsay"
0.839
And
I shutdown Tails and wait for the computer to power off
6.457
And
I start Tails from USB drive "__internal" with network unplugged
58.645
And
I enable persistence
12.114
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
40.077
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.743
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.061
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.127
And
I can open the Additional Software configuration window from the notification
2.170
And
I shutdown Tails and wait for the computer to power off
17.933
And
I start Tails from USB drive "__internal" with network unplugged
58.380
And
I enable persistence
11.846
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.553
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.947
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091