And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.471
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.700
And
I accept adding "cowsay" to Additional Software
5.398
And
Additional Software is correctly configured for package "cowsay"
0.886
And
I shutdown Tails and wait for the computer to power off
6.430
And
I start Tails from USB drive "__internal" with network unplugged
58.192
And
I enable persistence
10.704
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
38.473
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.069
And
available upgrades have been checked
0.239
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.345
And
I can open the Additional Software configuration window from the notification
2.270
And
I shutdown Tails and wait for the computer to power off
13.726
And
I start Tails from USB drive "__internal" with network unplugged
58.512
And
I enable persistence
13.122
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
45.117
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.303
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089