And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.445
And
I configure APT to prefer an old version of cowsay
0.051
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.920
And
I accept adding "cowsay" to Additional Software
6.069
And
Additional Software is correctly configured for package "cowsay"
0.804
And
I shutdown Tails and wait for the computer to power off
6.462
And
I start Tails from USB drive "__internal" with network unplugged
57.758
And
I enable persistence
13.938
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
42.548
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.734
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.129
And
available upgrades have been checked
1.115
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.723
And
I can open the Additional Software configuration window from the notification
3.624
And
I shutdown Tails and wait for the computer to power off
11.325
And
I start Tails from USB drive "__internal" with network unplugged
59.936
And
I enable persistence
12.227
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.401
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098