And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.278
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.875
And
I accept adding "cowsay" to Additional Software
6.801
And
Additional Software is correctly configured for package "cowsay"
0.991
And
I shutdown Tails and wait for the computer to power off
4.663
And
I start Tails from USB drive "__internal" with network unplugged
58.569
And
I enable persistence
11.131
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
38.301
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.250
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.063
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.796
And
I can open the Additional Software configuration window from the notification
2.210
And
I shutdown Tails and wait for the computer to power off
13.534
And
I start Tails from USB drive "__internal" with network unplugged
58.134
And
I enable persistence
11.310
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
37.488
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.289
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092