And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.730
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.649
And
I accept adding "cowsay" to Additional Software
5.310
And
Additional Software is correctly configured for package "cowsay"
0.915
And
I shutdown Tails and wait for the computer to power off
6.485
And
I start Tails from USB drive "__internal" with network unplugged
58.985
And
I enable persistence
11.113
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
43.093
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.258
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.087
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.292
And
I can open the Additional Software configuration window from the notification
2.478
And
I shutdown Tails and wait for the computer to power off
2:6.885
And
I start Tails from USB drive "__internal" with network unplugged
58.451
And
I enable persistence
13.657
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.530
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.308
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092