And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.962
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.425
And
I accept adding "cowsay" to Additional Software
5.287
And
Additional Software is correctly configured for package "cowsay"
0.922
And
I shutdown Tails and wait for the computer to power off
6.293
And
I start Tails from USB drive "__internal" with network unplugged
59.247
And
I enable persistence
11.811
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
38.017
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.068
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.079
And
available upgrades have been checked
1.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.212
And
I can open the Additional Software configuration window from the notification
3.193
And
I shutdown Tails and wait for the computer to power off
6.676
And
I start Tails from USB drive "__internal" with network unplugged
59.094
And
I enable persistence
11.389
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
39.773
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.852
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111