Cucumber Reports (no 5367) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	5367	05 Jan 2025, 12:23

	Steps	Scenarios	Features
Installing Tails to a USB drive	91	1	3	0	0	95	11	1	12	24:8.275	Failed

Tags: @product @not_release_blocker

25.253

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.055

And I temporarily create a 4 GiB disk named "gptfat" 0.059

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.287

And I plug USB drive "gptfat" 2.379

When I start Tails Installer 8.408

Then I am told by Tails Installer that the destination device "is too small" 0.063

Hooks

After features/support/hooks.rb:326 0.804

After features/support/hooks.rb:100 0.001

Tags: @product

19.688

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.892

And I temporarily create a 7200 MiB disk named "temp" 0.060

And I start Tails Installer 8.882

But a suitable USB device is not found 0.026

When I plug USB drive "temp" 2.505

Then the "temp" USB drive is selected 0.120

When I unplug USB drive "temp" 0.177

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:326 0.820

After features/support/hooks.rb:100 0.000

Tags: @product

2:23.555

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:269 0.005

Steps

Given I have started Tails from DVD without network and logged in 8.030

And I temporarily create a 7200 MiB disk named "install" 0.057

And I create a gpt partition with a vfat filesystem on disk "install" 6.368

And I plug USB drive "install" 2.473

And I install Tails to USB drive "install" by cloning 1:42.426

Then the running Tails is installed on USB drive "install" 18.953

And there is a random seed on USB drive "install" 5.170

But there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:326 1.159

After features/support/hooks.rb:100 0.122

Tags: @product

2:13.553

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.009

And I temporarily create a 7200 MiB disk named "install" 0.064

And I plug USB drive "install" 2.434

And I install Tails to USB drive "install" by cloning 1:44.495

Then the running Tails is installed on USB drive "install" 12.504

And there is a random seed on USB drive "install" 5.975

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:326 1.341

After features/support/hooks.rb:100 0.124

Tags: @product

2:54.468

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.735

And I create a file in the Persistent directory 0.079

And I temporarily create a 7200 MiB disk named "install" 0.049

And I create a gpt partition with a vfat filesystem on disk "install" 6.543

And I plug USB drive "install" 2.594

And I install Tails with Persistent Storage to USB drive "install" by cloning 2:5.098

Then the running Tails is installed on USB drive "install" 16.196

And there is a random seed on USB drive "install" 5.939

And there is a persistence partition on USB drive "install" 0.068

And the USB drive "install" contains the same files as my persistent storage 5.162

Hooks

After features/support/hooks.rb:326 2.694

After features/support/hooks.rb:100 0.134

Tags: @product

2:41.963

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.676

And I temporarily create a 7200 MiB disk named "install" 0.038

And I plug USB drive "install" 2.869

And I install Tails to USB drive "install" by cloning 2:1.455

Then the running Tails is installed on USB drive "install" 17.829

And there is a random seed on USB drive "install" 6.017

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:326 2.598

After features/support/hooks.rb:100 0.103

Tags: @product

2:22.551

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:269 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.711

And I have started Tails from DVD without network and logged in 8.371

And I clone USB drive "__internal" to a temporary USB drive "install" 1.132

And I plug USB drive "install" 2.467

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 1:40.358

Then the running Tails is installed on USB drive "install" 13.484

And there is a random seed on USB drive "install" 5.953

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:326 1.086

After features/support/hooks.rb:100 0.118

Tags: @product @uefi

3:12.560

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:269 0.007

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.097

And I power off the computer 0.349

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.087

try_for()

try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:240:in `rescue in wait_any'
./features/support/helpers/screen.rb:224:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'

Then Tails is running from USB drive "__internal" 0.000

And the boot device has safe access rights 0.000

And Tails has started in UEFI mode 0.000

Hooks

After features/support/hooks.rb:326 10.567

Output 1

SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 00:57:20)

Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5367/artifact/build-artifacts/00:57:20_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png

Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5367/artifact/build-artifacts/00:57:20_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv

Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5367/artifact/build-artifacts/00:57:20_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal

After features/support/hooks.rb:100 0.101

Tags: @product

1:40.083

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.012

And I plug and mount a USB drive containing a Tails USB image 39.793

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.385

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 49.848

Hooks

After features/support/hooks.rb:326 2.060

After features/support/hooks.rb:100 0.097

Tags: @product

1:25.146

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.162

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:23.684

Then Tails is running from USB drive "usbimage" 0.324

And the label of the system partition on "usbimage" is "Tails" 0.341

And the system partition on "usbimage" is an EFI system partition 0.208

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.167

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.081

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.082

And the system partition on "usbimage" has the expected flags 0.093

Hooks

After features/support/hooks.rb:326 0.749

After features/support/hooks.rb:100 0.006

Tags: @product

2:21.485

Scenario Error when the GPT backup header is corrupt

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.173

And I set Tails to boot with options "test_gpt_corruption=gpt_backup,gpt_backup_table" 0.000

And I create a 7200 MiB disk named "temp" 0.041

And I plug USB drive "temp" 1.054

And I write the Tails USB image to disk "temp" 29.201

And I start Tails from USB drive "temp" with network unplugged 1:27.482

Then Tails is running from USB drive "temp" 0.333

When I log in to a new session 16.633

And all notifications have disappeared 6.421

Then the system journal includes message "Detected partitioning-corruption, but not showing any message" 0.143

Hooks

After features/support/hooks.rb:326 0.805

After features/support/hooks.rb:100 0.006

Tags: @product

2:7.964

Scenario Error when the disk GUID has not changed

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.190

And I set Tails to boot with options "test_gpt_corruption=guid" 0.000

And I create a 7200 MiB disk named "temp" 0.169

And I plug USB drive "temp" 1.047

And I write the Tails USB image to disk "temp" 26.787

And I start Tails from USB drive "temp" with network unplugged 1:16.902

Then Tails is running from USB drive "temp" 0.339

When I log in to a new session 15.765

And all notifications have disappeared 6.475

Then I see an error about system partition resizing 0.285

Hooks

After features/support/hooks.rb:326 0.699

After features/support/hooks.rb:100 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	91	1	3	0	0	95	11	1	12	24:8.275	Failed

Feature Report