Cucumber Reports (no 5368) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	5368	06 Jan 2025, 12:28

	Steps	Scenarios	Features
Installing Tails to a USB drive	91	1	3	0	0	95	11	1	12	24:22.236	Failed

Tags: @product @not_release_blocker

25.467

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.013

And I temporarily create a 4 GiB disk named "gptfat" 0.049

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.216

And I plug USB drive "gptfat" 2.465

When I start Tails Installer 8.675

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:326 0.826

After features/support/hooks.rb:100 0.001

Tags: @product

19.068

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.049

And I temporarily create a 7200 MiB disk named "temp" 0.071

And I start Tails Installer 8.140

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.455

Then the "temp" USB drive is selected 0.133

When I unplug USB drive "temp" 0.175

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:326 1.408

After features/support/hooks.rb:100 0.000

Tags: @product

2:29.036

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:269 0.004

Steps

Given I have started Tails from DVD without network and logged in 7.995

And I temporarily create a 7200 MiB disk named "install" 0.076

And I create a gpt partition with a vfat filesystem on disk "install" 6.399

And I plug USB drive "install" 2.414

And I install Tails to USB drive "install" by cloning 1:54.527

Then the running Tails is installed on USB drive "install" 11.560

And there is a random seed on USB drive "install" 5.996

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:326 1.494

After features/support/hooks.rb:100 0.121

Tags: @product

2:25.408

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.006

And I temporarily create a 7200 MiB disk named "install" 0.065

And I plug USB drive "install" 2.548

And I install Tails to USB drive "install" by cloning 1:56.760

Then the running Tails is installed on USB drive "install" 12.008

And there is a random seed on USB drive "install" 5.944

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:326 1.289

After features/support/hooks.rb:100 0.123

Tags: @product

2:54.098

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.843

And I create a file in the Persistent directory 0.117

And I temporarily create a 7200 MiB disk named "install" 0.051

And I create a gpt partition with a vfat filesystem on disk "install" 6.365

And I plug USB drive "install" 2.624

And I install Tails with Persistent Storage to USB drive "install" by cloning 2:5.068

Then the running Tails is installed on USB drive "install" 16.735

And there is a random seed on USB drive "install" 5.946

And there is a persistence partition on USB drive "install" 0.062

And the USB drive "install" contains the same files as my persistent storage 3.283

Hooks

After features/support/hooks.rb:326 2.087

After features/support/hooks.rb:100 0.133

Tags: @product

2:33.946

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.450

And I temporarily create a 7200 MiB disk named "install" 0.040

And I plug USB drive "install" 2.644

And I install Tails to USB drive "install" by cloning 1:55.809

Then the running Tails is installed on USB drive "install" 18.010

And there is a random seed on USB drive "install" 5.913

And there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:326 1.890

After features/support/hooks.rb:100 0.096

Tags: @product

2:26.000

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:269 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.805

And I have started Tails from DVD without network and logged in 8.682

And I clone USB drive "__internal" to a temporary USB drive "install" 1.147

And I plug USB drive "install" 3.705

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 1:42.841

Then the running Tails is installed on USB drive "install" 13.730

And there is a random seed on USB drive "install" 6.025

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:326 1.160

After features/support/hooks.rb:100 0.121

Tags: @product @uefi

3:13.022

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:269 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.263

And I power off the computer 0.340

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.390

try_for()

try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:240:in `rescue in wait_any'
./features/support/helpers/screen.rb:224:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'

Then Tails is running from USB drive "__internal" 0.000

And the boot device has safe access rights 0.000

And Tails has started in UEFI mode 0.000

Hooks

After features/support/hooks.rb:326 10.764

Output 1

SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 00:57:09)

Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5368/artifact/build-artifacts/00:57:09_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png

Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5368/artifact/build-artifacts/00:57:09_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv

Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5368/artifact/build-artifacts/00:57:09_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal

After features/support/hooks.rb:100 0.062

Tags: @product

1:42.479

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.979

And I plug and mount a USB drive containing a Tails USB image 41.384

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.362

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 50.710

Hooks

After features/support/hooks.rb:326 2.415

After features/support/hooks.rb:100 0.096

Tags: @product

1:26.469

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.224

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:24.838

Then Tails is running from USB drive "usbimage" 0.353

And the label of the system partition on "usbimage" is "Tails" 0.347

And the system partition on "usbimage" is an EFI system partition 0.234

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.150

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.082

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.107

And the system partition on "usbimage" has the expected flags 0.129

Hooks

After features/support/hooks.rb:326 0.652

After features/support/hooks.rb:100 0.006

Tags: @product

2:15.067

Scenario Error when the GPT backup header is corrupt

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.166

And I set Tails to boot with options "test_gpt_corruption=gpt_backup,gpt_backup_table" 0.000

And I create a 7200 MiB disk named "temp" 0.040

And I plug USB drive "temp" 1.055

And I write the Tails USB image to disk "temp" 28.854

And I start Tails from USB drive "temp" with network unplugged 1:21.252

Then Tails is running from USB drive "temp" 0.351

When I log in to a new session 16.643

And all notifications have disappeared 6.566

Then the system journal includes message "Detected partitioning-corruption, but not showing any message" 0.138

Hooks

After features/support/hooks.rb:326 4.053

After features/support/hooks.rb:100 0.006

Tags: @product

2:12.170

Scenario Error when the disk GUID has not changed

Hooks

Before features/support/hooks.rb:269 0.002

Steps

Given a computer 0.198

And I set Tails to boot with options "test_gpt_corruption=guid" 0.000

And I create a 7200 MiB disk named "temp" 0.161

And I plug USB drive "temp" 1.046

And I write the Tails USB image to disk "temp" 26.539

And I start Tails from USB drive "temp" with network unplugged 1:19.199

Then Tails is running from USB drive "temp" 0.359

When I log in to a new session 18.241

And all notifications have disappeared 6.239

Then I see an error about system partition resizing 0.184

Hooks

After features/support/hooks.rb:326 0.913

After features/support/hooks.rb:100 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	91	1	3	0	0	95	11	1	12	24:22.236	Failed

Feature Report