And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.147
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.661
And
I accept adding "cowsay" to Additional Software
6.557
And
Additional Software is correctly configured for package "cowsay"
0.882
And
I shutdown Tails and wait for the computer to power off
4.684
And
I start Tails from USB drive "__internal" with network unplugged
58.387
And
I enable persistence
12.551
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
39.096
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.957
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.065
And
available upgrades have been checked
1.399
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.779
And
I can open the Additional Software configuration window from the notification
2.340
And
I shutdown Tails and wait for the computer to power off
12.951
And
I start Tails from USB drive "__internal" with network unplugged
58.213
And
I enable persistence
12.907
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
35.209
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081