And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.000
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.182
And
I accept adding "cowsay" to Additional Software
4.447
And
Additional Software is correctly configured for package "cowsay"
1.105
And
I shutdown Tails and wait for the computer to power off
6.368
And
I start Tails from USB drive "__internal" with network unplugged
1:3.587
And
I enable persistence
14.157
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
42.442
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.414
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.081
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.840
And
I can open the Additional Software configuration window from the notification
3.064
And
I shutdown Tails and wait for the computer to power off
2:2.371
And
I start Tails from USB drive "__internal" with network unplugged
1:1.899
And
I enable persistence
14.701
And
I configure APT to prefer an old version of cowsay
0.040
And
I log in to a new session
44.050
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.186
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105