And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.180
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.970
And
I accept adding "cowsay" to Additional Software
3.208
And
Additional Software is correctly configured for package "cowsay"
0.964
And
I shutdown Tails and wait for the computer to power off
6.420
And
I start Tails from USB drive "__internal" with network unplugged
59.818
And
I enable persistence
12.490
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.120
And
I log in to a new session
44.323
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.696
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.066
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.307
And
I can open the Additional Software configuration window from the notification
3.138
And
I shutdown Tails and wait for the computer to power off
19.205
And
I start Tails from USB drive "__internal" with network unplugged
59.327
And
I enable persistence
13.587
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
40.575
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
the network is plugged
0.131
Then
the Additional Software upgrade service has started
0.212
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096