And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.841
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.315
And
I accept adding "cowsay" to Additional Software
5.160
And
Additional Software is correctly configured for package "cowsay"
0.916
And
I shutdown Tails and wait for the computer to power off
4.267
And
I start Tails from USB drive "__internal" with network unplugged
59.478
And
I enable persistence
13.005
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
39.568
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.080
And
available upgrades have been checked
0.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.994
And
I can open the Additional Software configuration window from the notification
2.458
And
I shutdown Tails and wait for the computer to power off
18.494
And
I start Tails from USB drive "__internal" with network unplugged
59.293
And
I enable persistence
12.946
And
I configure APT to prefer an old version of cowsay
0.054
And
I log in to a new session
38.497
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.048
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.251
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097