And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.032
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.712
And
I accept adding "cowsay" to Additional Software
5.539
And
Additional Software is correctly configured for package "cowsay"
1.138
And
I shutdown Tails and wait for the computer to power off
6.432
And
I start Tails from USB drive "__internal" with network unplugged
57.896
And
I enable persistence
13.038
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
40.842
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.956
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.075
And
available upgrades have been checked
0.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.200
And
I can open the Additional Software configuration window from the notification
2.862
And
I shutdown Tails and wait for the computer to power off
13.463
And
I start Tails from USB drive "__internal" with network unplugged
57.899
And
I enable persistence
12.187
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
37.969
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.804
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105