Project Number Date
test_Tails_ISO_stable 5383 09 Jan 2025, 12:59

Failures Overview

The following summary displays scenarios that failed.

Feature: Installing Tails to a USB drive
Tags: @product @uefi
3:15.408
Scenario Booting Tails from a USB drive in UEFI mode
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.639
And I power off the computer 0.336
And the computer is set to boot in UEFI mode 0.026
When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.405
try_for() 
try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:240:in `rescue in wait_any'
./features/support/helpers/screen.rb:224:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'
Then Tails is running from USB drive "__internal" 0.000
And the boot device has safe access rights 0.000
And Tails has started in UEFI mode 0.000
After features/support/hooks.rb:326 10.576 
SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 00:57:59)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/00:57:59_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/00:57:59_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/00:57:59_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal
After features/support/hooks.rb:100 0.085
Feature: Upgrading an old Tails USB installation
Tags: @product
22:4.073
Scenario Writing files to a read/write-enabled persistent partition with the old Tails USB installation
Before features/support/hooks.rb:269 0.003
Steps
Given a computer 0.177
And I start Tails from USB drive "old" with network unplugged and I login with persistence enabled 22:3.896
execution 
execution expired (RemoteShell::Timeout)
./features/support/helpers/remote_shell.rb:56:in `read'
./features/support/helpers/remote_shell.rb:56:in `block (3 levels) in communicate'
./features/support/helpers/remote_shell.rb:55:in `block (2 levels) in communicate'
./features/support/helpers/remote_shell.rb:42:in `loop'
./features/support/helpers/remote_shell.rb:42:in `block in communicate'
./features/support/helpers/remote_shell.rb:37:in `communicate'
./features/support/helpers/remote_shell.rb:174:in `execute'
./features/support/helpers/remote_shell.rb:185:in `initialize'
./features/support/helpers/dogtail.rb:80:in `new'
./features/support/helpers/dogtail.rb:80:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/common_steps.rb:712:in `new'
./features/step_definitions/common_steps.rb:712:in `/^all notifications have disappeared$/'
./features/step_definitions/common_steps.rb:298:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_upgrade.feature:46:in `And I start Tails from USB drive "old" with network unplugged and I login with persistence enabled'
Then Tails is running from USB drive "old" 0.000
And all tps features are active 0.000
When I write some files expected to persist 0.000
# Verify that our baseline for the next scenarios is sane
And all persistent filesystems have safe access rights 0.000
And all persistence configuration files have safe access rights 0.000
And all persistent directories from the old Tails version have safe access rights 0.000
And I take note of which tps features are available 0.000
And I shutdown Tails and wait for the computer to power off 0.000
# XXX: how does guestfs work vs snapshots?
Then only the expected files are present on the persistence partition on USB drive "old" 0.000
After features/support/hooks.rb:326 10.839 
SCENARIO FAILED: 'Writing files to a read/write-enabled persistent partition with the old Tails USB installation' (at time 01:53:46)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/01:53:46_Writing_files_to_a_read_write-enabled_persistent_partition_with_the_old_Tails_USB_installation.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/01:53:46_Writing_files_to_a_read_write-enabled_persistent_partition_with_the_old_Tails_USB_installation.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/01:53:46_Writing_files_to_a_read_write-enabled_persistent_partition_with_the_old_Tails_USB_installation.journal
After features/support/hooks.rb:100 0.008
Feature: Upgrading an old Tails USB installation
Tags: @product
2:20.828
Scenario Booting Tails from a USB drive upgraded from USB with persistence enabled
Before features/support/hooks.rb:269 0.006
Steps
Given a computer 0.167
And I start Tails from USB drive "to_upgrade" with network unplugged and I login with persistence enabled 2:14.718
Then all tps features from the old Tails version are active 1.957
And Tails is running from USB drive "to_upgrade" 0.332
And the boot device has safe access rights 3.589
And the expected persistent files created with the old Tails version are present in the filesystem 0.062
Could 
Could not find expected file in persistent directory /home/amnesia/Persistent.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/support/helpers/misc_helpers.rb:21:in `assert_vmcommand_success'
./features/step_definitions/usb.rb:1094:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:1093:in `each'
./features/step_definitions/usb.rb:1093:in `/^the expected persistent files(| created with the old Tails version) are present in the filesystem$/'
features/usb_upgrade.feature:77:in `And the expected persistent files created with the old Tails version are present in the filesystem'
And all persistent directories from the old Tails version have safe access rights 0.000
After features/support/hooks.rb:326 5.155 
SCENARIO FAILED: 'Booting Tails from a USB drive upgraded from USB with persistence enabled' (at time 01:58:50)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/01:58:50_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/01:58:50_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/01:58:50_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5383/artifact/build-artifacts/01:58:50_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.journal
After features/support/hooks.rb:100 0.008