And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.345
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.301
And
I accept adding "cowsay" to Additional Software
6.852
And
Additional Software is correctly configured for package "cowsay"
0.862
And
I shutdown Tails and wait for the computer to power off
6.424
And
I start Tails from USB drive "__internal" with network unplugged
58.001
And
I enable persistence
11.584
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
37.715
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.389
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.075
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.340
And
I can open the Additional Software configuration window from the notification
2.184
And
I shutdown Tails and wait for the computer to power off
18.151
And
I start Tails from USB drive "__internal" with network unplugged
58.324
And
I enable persistence
12.206
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
36.096
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.890
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.097
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084