And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:47.374
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.927
And
I accept adding "cowsay" to Additional Software
5.569
And
Additional Software is correctly configured for package "cowsay"
0.942
And
I shutdown Tails and wait for the computer to power off
4.422
And
I start Tails from USB drive "__internal" with network unplugged
59.147
And
I enable persistence
13.208
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
39.547
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.072
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.603
And
I can open the Additional Software configuration window from the notification
2.360
And
I shutdown Tails and wait for the computer to power off
18.447
And
I start Tails from USB drive "__internal" with network unplugged
58.427
And
I enable persistence
13.371
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
35.370
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.280
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081