And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.975
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.179
And
I accept adding "cowsay" to Additional Software
5.574
And
Additional Software is correctly configured for package "cowsay"
1.089
And
I shutdown Tails and wait for the computer to power off
6.496
And
I start Tails from USB drive "__internal" with network unplugged
1:1.864
And
I enable persistence
14.710
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
42.687
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.408
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.143
And
available upgrades have been checked
0.219
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.204
And
I can open the Additional Software configuration window from the notification
2.914
And
I shutdown Tails and wait for the computer to power off
2:2.391
And
I start Tails from USB drive "__internal" with network unplugged
1:2.112
And
I enable persistence
15.206
And
I configure APT to prefer an old version of cowsay
0.040
And
I log in to a new session
41.890
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.221
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103