And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.796
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.193
And
I accept adding "cowsay" to Additional Software
7.070
And
Additional Software is correctly configured for package "cowsay"
1.011
And
I shutdown Tails and wait for the computer to power off
6.511
And
I start Tails from USB drive "__internal" with network unplugged
1:1.815
And
I enable persistence
12.950
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
37.725
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.091
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.333
And
I can open the Additional Software configuration window from the notification
3.131
And
I shutdown Tails and wait for the computer to power off
2:4.080
And
I start Tails from USB drive "__internal" with network unplugged
1:1.434
And
I enable persistence
15.143
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
38.871
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.591
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.208
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090