And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.891
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.772
And
I accept adding "cowsay" to Additional Software
4.710
And
Additional Software is correctly configured for package "cowsay"
1.063
And
I shutdown Tails and wait for the computer to power off
6.345
And
I start Tails from USB drive "__internal" with network unplugged
1:1.649
And
I enable persistence
13.301
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
39.912
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.012
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.070
And
available upgrades have been checked
0.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.538
And
I can open the Additional Software configuration window from the notification
3.228
And
I shutdown Tails and wait for the computer to power off
2:7.373
And
I start Tails from USB drive "__internal" with network unplugged
1:3.836
And
I enable persistence
14.522
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
38.795
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.673
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.175
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107