And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.096
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.609
And
I accept adding "cowsay" to Additional Software
5.864
And
Additional Software is correctly configured for package "cowsay"
1.087
And
I shutdown Tails and wait for the computer to power off
6.441
And
I start Tails from USB drive "__internal" with network unplugged
1:0.321
And
I enable persistence
14.245
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
44.223
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.846
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.073
And
available upgrades have been checked
2.284
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.769
And
I can open the Additional Software configuration window from the notification
2.357
And
I shutdown Tails and wait for the computer to power off
10.899
And
I start Tails from USB drive "__internal" with network unplugged
1:7.908
And
I enable persistence
11.992
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
44.071
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.135
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.189
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088