And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.954
And
I configure APT to prefer an old version of cowsay
0.038
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.800
And
I accept adding "cowsay" to Additional Software
6.636
And
Additional Software is correctly configured for package "cowsay"
0.937
And
I shutdown Tails and wait for the computer to power off
6.639
And
I start Tails from USB drive "__internal" with network unplugged
1:0.040
And
I enable persistence
12.944
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
38.665
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.096
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.826
And
I can open the Additional Software configuration window from the notification
3.626
And
I shutdown Tails and wait for the computer to power off
13.311
And
I start Tails from USB drive "__internal" with network unplugged
1:8.760
And
I enable persistence
12.374
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
42.520
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.516
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101