And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.039
And
I configure APT to prefer an old version of cowsay
0.075
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.350
And
I accept adding "cowsay" to Additional Software
4.260
And
Additional Software is correctly configured for package "cowsay"
1.118
And
I shutdown Tails and wait for the computer to power off
6.679
And
I start Tails from USB drive "__internal" with network unplugged
1:0.605
And
I enable persistence
13.447
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
40.931
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.098
And
the network is plugged
0.076
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.838
And
I can open the Additional Software configuration window from the notification
2.823
And
I shutdown Tails and wait for the computer to power off
2:6.975
And
I start Tails from USB drive "__internal" with network unplugged
1:3.494
And
I enable persistence
12.684
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.071
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.806
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.230
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107