And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.596
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.438
And
I accept adding "cowsay" to Additional Software
5.965
And
Additional Software is correctly configured for package "cowsay"
1.359
And
I shutdown Tails and wait for the computer to power off
4.347
And
I start Tails from USB drive "__internal" with network unplugged
1:0.602
And
I enable persistence
17.437
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
39.553
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.067
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.062
And
available upgrades have been checked
1.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.836
And
I can open the Additional Software configuration window from the notification
3.064
And
I shutdown Tails and wait for the computer to power off
2:2.308
And
I start Tails from USB drive "__internal" with network unplugged
1:7.440
And
I enable persistence
14.302
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
39.233
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.426
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.242
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109