And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.414
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.385
And
I accept adding "cowsay" to Additional Software
4.288
And
Additional Software is correctly configured for package "cowsay"
1.039
And
I shutdown Tails and wait for the computer to power off
6.630
And
I start Tails from USB drive "__internal" with network unplugged
1:2.438
And
I enable persistence
17.063
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
42.892
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.492
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.080
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.933
And
I can open the Additional Software configuration window from the notification
3.059
And
I shutdown Tails and wait for the computer to power off
2:7.111
And
I start Tails from USB drive "__internal" with network unplugged
1:0.410
And
I enable persistence
14.027
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
41.832
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.990
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.285
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.116