And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.044
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.583
And
I accept adding "cowsay" to Additional Software
6.517
And
Additional Software is correctly configured for package "cowsay"
0.933
And
I shutdown Tails and wait for the computer to power off
4.362
And
I start Tails from USB drive "__internal" with network unplugged
1:1.794
And
I enable persistence
12.181
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.101
And
I log in to a new session
39.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.084
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.791
And
I can open the Additional Software configuration window from the notification
2.671
And
I shutdown Tails and wait for the computer to power off
2:8.086
And
I start Tails from USB drive "__internal" with network unplugged
1:0.552
And
I enable persistence
14.413
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
44.899
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.277
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095