And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.020
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.793
And
I accept adding "cowsay" to Additional Software
6.982
And
Additional Software is correctly configured for package "cowsay"
0.937
And
I shutdown Tails and wait for the computer to power off
6.596
And
I start Tails from USB drive "__internal" with network unplugged
59.168
And
I enable persistence
15.900
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
39.208
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.113
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.066
And
available upgrades have been checked
1.310
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.594
And
I can open the Additional Software configuration window from the notification
2.302
And
I shutdown Tails and wait for the computer to power off
17.717
And
I start Tails from USB drive "__internal" with network unplugged
58.731
And
I enable persistence
12.106
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
39.378
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.067
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097