And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.437
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.290
And
I accept adding "cowsay" to Additional Software
5.899
And
Additional Software is correctly configured for package "cowsay"
1.147
And
I shutdown Tails and wait for the computer to power off
6.618
And
I start Tails from USB drive "__internal" with network unplugged
1:7.670
And
I enable persistence
15.230
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
44.592
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.281
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.106
And
the network is plugged
0.085
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.644
And
I can open the Additional Software configuration window from the notification
2.060
And
I shutdown Tails and wait for the computer to power off
2:8.178
And
I start Tails from USB drive "__internal" with network unplugged
1:5.266
And
I enable persistence
13.791
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
45.075
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096