And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.405
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.042
And
I accept adding "cowsay" to Additional Software
4.492
And
Additional Software is correctly configured for package "cowsay"
0.932
And
I shutdown Tails and wait for the computer to power off
6.724
And
I start Tails from USB drive "__internal" with network unplugged
1:1.928
And
I enable persistence
16.827
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
40.721
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.993
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.096
And
available upgrades have been checked
1.154
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.366
And
I can open the Additional Software configuration window from the notification
2.636
And
I shutdown Tails and wait for the computer to power off
14.536
And
I start Tails from USB drive "__internal" with network unplugged
1:2.457
And
I enable persistence
17.961
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
43.395
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.545
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.577
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089