And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.603
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.809
And
I accept adding "cowsay" to Additional Software
6.813
And
Additional Software is correctly configured for package "cowsay"
0.942
And
I shutdown Tails and wait for the computer to power off
6.448
And
I start Tails from USB drive "__internal" with network unplugged
1:2.313
And
I enable persistence
12.655
And
I configure APT to prefer an old version of cowsay
0.042
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
44.364
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.080
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.625
And
I can open the Additional Software configuration window from the notification
4.026
And
I shutdown Tails and wait for the computer to power off
2:7.173
And
I start Tails from USB drive "__internal" with network unplugged
1:7.878
And
I enable persistence
13.308
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
43.967
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092