And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.939
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.068
And
I accept adding "cowsay" to Additional Software
6.682
And
Additional Software is correctly configured for package "cowsay"
0.940
And
I shutdown Tails and wait for the computer to power off
6.508
And
I start Tails from USB drive "__internal" with network unplugged
1:1.729
And
I enable persistence
14.294
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
37.048
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.570
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.066
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.669
And
I can open the Additional Software configuration window from the notification
3.970
And
I shutdown Tails and wait for the computer to power off
14.786
And
I start Tails from USB drive "__internal" with network unplugged
1:0.342
And
I enable persistence
11.668
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
38.074
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.524
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.096
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.113