And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.545
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.154
And
I accept adding "cowsay" to Additional Software
5.333
And
Additional Software is correctly configured for package "cowsay"
0.880
And
I shutdown Tails and wait for the computer to power off
6.521
And
I start Tails from USB drive "__internal" with network unplugged
57.671
And
I enable persistence
11.505
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
37.065
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.270
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.100
And
available upgrades have been checked
1.115
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.664
And
I can open the Additional Software configuration window from the notification
2.258
And
I shutdown Tails and wait for the computer to power off
13.235
And
I start Tails from USB drive "__internal" with network unplugged
57.671
And
I enable persistence
13.259
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.675
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.111
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087