And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.849
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.738
And
I accept adding "cowsay" to Additional Software
6.867
And
Additional Software is correctly configured for package "cowsay"
0.952
And
I shutdown Tails and wait for the computer to power off
4.356
And
I start Tails from USB drive "__internal" with network unplugged
58.127
And
I enable persistence
12.016
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
38.314
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.682
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.074
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.242
And
I can open the Additional Software configuration window from the notification
1.817
And
I shutdown Tails and wait for the computer to power off
18.060
And
I start Tails from USB drive "__internal" with network unplugged
1:0.847
And
I enable persistence
13.867
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.675
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.472
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.207
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101