And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.103
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.827
And
I accept adding "cowsay" to Additional Software
6.361
And
Additional Software is correctly configured for package "cowsay"
1.014
And
I shutdown Tails and wait for the computer to power off
4.349
And
I start Tails from USB drive "__internal" with network unplugged
1:1.331
And
I enable persistence
14.025
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
38.025
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.027
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.099
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.441
And
I can open the Additional Software configuration window from the notification
2.486
And
I shutdown Tails and wait for the computer to power off
2:7.721
And
I start Tails from USB drive "__internal" with network unplugged
59.575
And
I enable persistence
12.815
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
42.097
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.612
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099