And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.844
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.990
And
I accept adding "cowsay" to Additional Software
4.360
And
Additional Software is correctly configured for package "cowsay"
1.014
And
I shutdown Tails and wait for the computer to power off
6.722
And
I start Tails from USB drive "__internal" with network unplugged
1:3.647
And
I enable persistence
14.529
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
41.051
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.285
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.082
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.860
And
I can open the Additional Software configuration window from the notification
2.273
And
I shutdown Tails and wait for the computer to power off
12.651
And
I start Tails from USB drive "__internal" with network unplugged
1:3.083
And
I enable persistence
14.700
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
42.644
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.682
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.164
Then
the Additional Software upgrade service has started
0.250
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.137