And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.141
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.776
And
I accept adding "cowsay" to Additional Software
3.207
And
Additional Software is correctly configured for package "cowsay"
0.898
And
I shutdown Tails and wait for the computer to power off
6.486
And
I start Tails from USB drive "__internal" with network unplugged
1:1.865
And
I enable persistence
12.348
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.115
And
I log in to a new session
41.324
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.977
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.065
And
available upgrades have been checked
1.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.274
And
I can open the Additional Software configuration window from the notification
1.784
And
I shutdown Tails and wait for the computer to power off
19.362
And
I start Tails from USB drive "__internal" with network unplugged
1:0.113
And
I enable persistence
12.965
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
42.331
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.312
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.201
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071