And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.892
And
I configure APT to prefer an old version of cowsay
0.064
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.053
And
I accept adding "cowsay" to Additional Software
5.743
And
Additional Software is correctly configured for package "cowsay"
1.017
And
I shutdown Tails and wait for the computer to power off
4.608
And
I start Tails from USB drive "__internal" with network unplugged
59.462
And
I enable persistence
13.078
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
40.196
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.839
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.154
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.394
And
I can open the Additional Software configuration window from the notification
1.939
And
I shutdown Tails and wait for the computer to power off
2:7.630
And
I start Tails from USB drive "__internal" with network unplugged
1:1.083
And
I enable persistence
13.061
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
39.856
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091