And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.117
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.464
And
I accept adding "cowsay" to Additional Software
7.316
And
Additional Software is correctly configured for package "cowsay"
0.907
And
I shutdown Tails and wait for the computer to power off
6.514
And
I start Tails from USB drive "__internal" with network unplugged
1:4.050
And
I enable persistence
17.132
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
45.765
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.457
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.106
And
available upgrades have been checked
1.151
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.314
And
I can open the Additional Software configuration window from the notification
2.374
And
I shutdown Tails and wait for the computer to power off
18.972
And
I start Tails from USB drive "__internal" with network unplugged
1:12.835
And
I enable persistence
13.451
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
41.735
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.729
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.454
Then
the Additional Software upgrade service has started
0.183
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112