And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.633
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.348
And
I accept adding "cowsay" to Additional Software
4.453
And
Additional Software is correctly configured for package "cowsay"
0.945
And
I shutdown Tails and wait for the computer to power off
4.342
And
I start Tails from USB drive "__internal" with network unplugged
1:1.286
And
I enable persistence
15.239
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
40.508
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.474
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.098
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.086
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.347
And
I can open the Additional Software configuration window from the notification
2.717
And
I shutdown Tails and wait for the computer to power off
13.324
And
I start Tails from USB drive "__internal" with network unplugged
1:2.150
And
I enable persistence
13.340
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
42.394
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.315
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.233
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.140