And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.760
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.677
And
I accept adding "cowsay" to Additional Software
6.724
And
Additional Software is correctly configured for package "cowsay"
1.113
And
I shutdown Tails and wait for the computer to power off
6.452
And
I start Tails from USB drive "__internal" with network unplugged
1:1.155
And
I enable persistence
12.248
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
38.627
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.406
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.062
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.154
And
I can open the Additional Software configuration window from the notification
3.208
And
I shutdown Tails and wait for the computer to power off
2:6.832
And
I start Tails from USB drive "__internal" with network unplugged
1:1.064
And
I enable persistence
11.871
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
41.251
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.585
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097