And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.302
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.561
And
I accept adding "cowsay" to Additional Software
8.491
And
Additional Software is correctly configured for package "cowsay"
0.945
And
I shutdown Tails and wait for the computer to power off
6.392
And
I start Tails from USB drive "__internal" with network unplugged
1:8.023
And
I enable persistence
10.541
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
41.587
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.809
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.090
And
the network is plugged
0.069
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.536
And
I can open the Additional Software configuration window from the notification
3.265
And
I shutdown Tails and wait for the computer to power off
12.454
And
I start Tails from USB drive "__internal" with network unplugged
1:0.908
And
I enable persistence
12.643
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
37.673
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.514
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105