And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.419
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.763
And
I accept adding "cowsay" to Additional Software
5.412
And
Additional Software is correctly configured for package "cowsay"
0.921
And
I shutdown Tails and wait for the computer to power off
6.390
And
I start Tails from USB drive "__internal" with network unplugged
1:7.619
And
I enable persistence
13.652
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.112
And
I log in to a new session
37.742
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.443
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.072
And
available upgrades have been checked
1.217
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.886
And
I can open the Additional Software configuration window from the notification
3.645
And
I shutdown Tails and wait for the computer to power off
12.746
And
I start Tails from USB drive "__internal" with network unplugged
59.661
And
I enable persistence
11.984
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
45.012
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.941
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.213
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.120