And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.844
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.978
And
I accept adding "cowsay" to Additional Software
6.576
And
Additional Software is correctly configured for package "cowsay"
1.059
And
I shutdown Tails and wait for the computer to power off
4.392
And
I start Tails from USB drive "__internal" with network unplugged
1:1.703
And
I enable persistence
13.703
And
I configure APT to prefer an old version of cowsay
0.052
And
I disable the tails-virt-notify-user.service user unit
0.137
And
I log in to a new session
40.759
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.487
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.066
And
available upgrades have been checked
1.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.864
And
I can open the Additional Software configuration window from the notification
2.646
And
I shutdown Tails and wait for the computer to power off
2:3.466
And
I start Tails from USB drive "__internal" with network unplugged
1:0.412
And
I enable persistence
12.108
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
39.587
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092