And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.189
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.647
And
I accept adding "cowsay" to Additional Software
5.115
And
Additional Software is correctly configured for package "cowsay"
0.938
And
I shutdown Tails and wait for the computer to power off
6.648
And
I start Tails from USB drive "__internal" with network unplugged
1:1.330
And
I enable persistence
13.204
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.108
And
I log in to a new session
43.694
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.080
And
available upgrades have been checked
1.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.723
And
I can open the Additional Software configuration window from the notification
2.574
And
I shutdown Tails and wait for the computer to power off
2:7.106
And
I start Tails from USB drive "__internal" with network unplugged
1:0.245
And
I enable persistence
12.164
And
I configure APT to prefer an old version of cowsay
0.292
And
I log in to a new session
38.461
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.877
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099