And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.032
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.864
And
I accept adding "cowsay" to Additional Software
7.888
And
Additional Software is correctly configured for package "cowsay"
0.950
And
I shutdown Tails and wait for the computer to power off
6.307
And
I start Tails from USB drive "__internal" with network unplugged
58.563
And
I enable persistence
10.864
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
39.672
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.446
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.069
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.148
And
I can open the Additional Software configuration window from the notification
2.815
And
I shutdown Tails and wait for the computer to power off
13.288
And
I start Tails from USB drive "__internal" with network unplugged
58.685
And
I enable persistence
12.793
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.188
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.717
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.127