And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.543
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.074
And
I accept adding "cowsay" to Additional Software
7.089
And
Additional Software is correctly configured for package "cowsay"
0.956
And
I shutdown Tails and wait for the computer to power off
6.732
And
I start Tails from USB drive "__internal" with network unplugged
1:0.694
And
I enable persistence
14.299
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
41.916
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.062
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.105
And
available upgrades have been checked
1.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.280
And
I can open the Additional Software configuration window from the notification
2.125
And
I shutdown Tails and wait for the computer to power off
12.914
And
I start Tails from USB drive "__internal" with network unplugged
1:8.631
And
I enable persistence
12.830
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
39.053
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.130
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.225
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111