And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.092
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.001
And
I accept adding "cowsay" to Additional Software
5.616
And
Additional Software is correctly configured for package "cowsay"
0.906
And
I shutdown Tails and wait for the computer to power off
4.486
And
I start Tails from USB drive "__internal" with network unplugged
1:0.994
And
I enable persistence
13.073
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
40.290
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.465
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.084
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.728
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
13.132
And
I start Tails from USB drive "__internal" with network unplugged
1:1.834
And
I enable persistence
12.254
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
47.462
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.820
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082