And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.607
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.069
And
I accept adding "cowsay" to Additional Software
5.716
And
Additional Software is correctly configured for package "cowsay"
0.973
And
I shutdown Tails and wait for the computer to power off
4.392
And
I start Tails from USB drive "__internal" with network unplugged
1:2.288
And
I enable persistence
14.655
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.121
And
I log in to a new session
45.981
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.302
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.098
And
available upgrades have been checked
1.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.378
And
I can open the Additional Software configuration window from the notification
2.882
And
I shutdown Tails and wait for the computer to power off
12.646
And
I start Tails from USB drive "__internal" with network unplugged
1:0.859
And
I enable persistence
12.720
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
39.578
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.674
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098