And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:59.963
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.734
And
I accept adding "cowsay" to Additional Software
4.467
And
Additional Software is correctly configured for package "cowsay"
0.943
And
I shutdown Tails and wait for the computer to power off
6.696
And
I start Tails from USB drive "__internal" with network unplugged
1:2.228
And
I enable persistence
14.857
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.139
And
I log in to a new session
47.948
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.096
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.348
And
I can open the Additional Software configuration window from the notification
2.991
And
I shutdown Tails and wait for the computer to power off
2:7.431
And
I start Tails from USB drive "__internal" with network unplugged
1:2.322
And
I enable persistence
13.333
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.665
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.606
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099