And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.447
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.130
And
I accept adding "cowsay" to Additional Software
6.738
And
Additional Software is correctly configured for package "cowsay"
1.024
And
I shutdown Tails and wait for the computer to power off
6.934
And
I start Tails from USB drive "__internal" with network unplugged
1:4.458
And
I enable persistence
24.644
And
I configure APT to prefer an old version of cowsay
0.074
And
I disable the tails-virt-notify-user.service user unit
0.144
And
I log in to a new session
47.281
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.581
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.087
And
I prepare the Additional Software upgrade process to fail
0.144
And
the network is plugged
0.113
And
available upgrades have been checked
1.266
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.957
And
I can open the Additional Software configuration window from the notification
3.072
And
I shutdown Tails and wait for the computer to power off
2:4.201
And
I start Tails from USB drive "__internal" with network unplugged
1:5.151
And
I enable persistence
11.705
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.831
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.963
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109