And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.861
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.174
And
I accept adding "cowsay" to Additional Software
5.641
And
Additional Software is correctly configured for package "cowsay"
0.946
And
I shutdown Tails and wait for the computer to power off
6.521
And
I start Tails from USB drive "__internal" with network unplugged
1:3.742
And
I enable persistence
15.070
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.113
And
I log in to a new session
48.418
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.056
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.085
And
available upgrades have been checked
1.149
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.253
And
I can open the Additional Software configuration window from the notification
2.722
And
I shutdown Tails and wait for the computer to power off
2:7.654
And
I start Tails from USB drive "__internal" with network unplugged
1:0.802
And
I enable persistence
12.847
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
41.743
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.662
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097